I bet you've seen HUD displays in modern jet fighters. All important data is shown on the windshield so the pilot reaction could be much faster. Now, that technology is also available... for your car!
Thanks to the GPS and magnetic field sensor, Holo HUD application displays current speed, GPS position and direction you are driving just on the windshield of your car. You don't have to lose the sight of the road just to check your speed while you're driving at night and, if you need them, you could turn on actual position and heading.
Features:
- NO ADS!
- No internet connection required!
- HUD (mirror) or standard display mode
- choose the font color that best suits you
- customize the app and display just the info you need
- choose between alternative ways of acquiring speed and heading
- maximum brightness mode available from in-app configuration
- supporting most of Android versions with different screen sizes and resolutions
How to use it?
- prepare your car, choose the spot under your windshield where you can place your phone safely without the risk of falling during turns, braking and accelerating (you can use the rubber sticker to keep your device on place even during the hard manouvers
- turn the GPS on and run the app
- customize the app by pressing the menu button on your device
- turn on the HUD mode and lay your phone on prepared spot so you can see the reflection on your windshield
- make sure it won't interrupt with your visibility of the road
- hit the road; as soon as the GPS position will be acquired, the data will show up
ATTENTION!
- ALWAYS pay attention to the road. Don't change the app settings while driving - ask your passanger to do it or stop safely and then make the changes. Obey the traffic laws and remember, SAFETY ON THE FIRST PLACE!
- NEVER treat the displayed data as precise or correct. These are for informational purposes only and do not replace the speedometer in your vehicle!
- The quality of readings depends on the GPS receiver in your device. If the signal reception would be affected by the obstacles (such as buildings, trees, bridges, tunnels, power lines), value displayed on the screen could stay the same till the next position is acquired.
- If the speed or direction seem unreliable, try changing the acquire mode of them in settings.</div> <div class="id-app-translated-desc" style="display:none">我敢打赌,你已经看到了在现代喷气式战斗机的HUD显示。所有重要的数据显示在挡风玻璃上,因此飞行员的反应要快得多。现在,该技术也可...你的车!
由于GPS和磁场传感器,全息平视显示器应用程序显示当前的速度,GPS的位置和方向,你驾驶你的车的挡风玻璃上。你没有失去视力的道路,当你在夜间行车,如果需要的话,你可以把实际的位置和标题,只是为了检查你的速度。
产品特点:
- 没有广告!
- 没有互联网连接的需要!
- HUD(镜像)或标准显示模式
- 选择最适合您的字体颜色
- 自定义的应用程序,只显示你需要的信息
- 选择其他方式获取速度和航向
- 最大亮度模式,提供从应用程序配置
- 支持不同的屏幕尺寸和分辨率的Android版本
如何使用它呢?
- 准备好你的车,当场选择在你的挡风玻璃上,您可以将您的手机安全无风险的下降在转弯时,刹车和加速(可以使用的橡胶贴,让您的设备甚至在硬盘manouvers,在地方
- 打开GPS上运行的应用程序
- 在您的设备上按“菜单”按钮,自定义应用程序
- 打开的HUD模式,并把你的手机准备点上,所以你可以看到在您的挡风玻璃反射
- 确保不会中断您的知名度之路
- 上路了,很快将被收购的GPS位置,数据将显示
注意!
- 时刻注意道路。驾驶时,不要更改应用程序设置 - 问你的做的通勤安全或停止,然后进行更改。请遵守交通法规,记住,安全放在首要位置!
- NEVER治疗所显示的数据是准确的或不正确的。这些都为仅供参考,不更换您的车辆的车速表!
- 读数的质量取决于在您的设备上的GPS接收器。如果信号的接收会受到障碍物(如建筑物,树木,桥梁,隧道,电力线),在屏幕上显示的值可以保持不变,直到下一个位置获得。
- 如果速度或方向似乎是不可靠的,试图改变他们在采集模式设置。</div> <div class="show-more-end">